Selco EB 70 - Page 82

&
$SSHQGL[&
7UDQVSRUWDQG,QVWDOODWLRQ
BIESSE S.p.A. Woodworking Machinery
(l111h044.fm-141101)
A sectioning guillotine device shall be installed on the pipe connecting the suction system to the
machine in order to disconnect the machine from the general supply system. This device shall be
located in a highly visible position so that the operator shall have prompt access to it.
The air consumption for suction is equal to 2,500 m
3
/h. It is crucial to know this value in order to
adapt the system.