35
When Eclipse is running from external (AC or DC) Power Supply, the External Power Present Indicator
will illuminate. Eclipse will always operate from external power when external power is available.
WARNING:
• Ensure adequate clearance around the DC Power Supply and the
Eclipse.
• Ensure the DC Power Supply and Eclipse are secured in the vehicle
so that is does not become a projectile in the event of a sudden
stop.
• DO NOT operate Eclipse while vehicle engine is not running. The
Eclipse could quickly drain the vehicle battery in some vehicles in
such a scenario.
CAUTION:
When operating the DC Power Supply at a 10A setting at flows above
2 LPM, the Eclipse will automatically drop back to 2 LPM continuous
flow and will emit a beep and will display a flow setting of 2.0.
NOTES:
• The green LED on Power Supply indicates that the Power Supply is
properly functioning; the red LED indicates a Power Supply fault.
• An audible alarm on DC Power Supply will sound when vehicle
voltage drops below 11.5VDC. If this occurs, unplug the DC Power
Supply from vehicle and operate the Eclipse using the Power
Cartridge.
To Next Page
Loading...