A1.4
Transducer unit (1131)
Approved by F.M. to the following standards:
FM 3611 - 1986
Approved as non-incendive for Class I, Division 2, Groups B, C and D; suitable for Class II,
Division 2, Group G hazardous locations.
Transducer unit (1132 and 1133)
Approved by F.M. to the following standards:
FM 3610 - 1988
FM 3615 - 1985
Approved as suitable for Class 1, Division 1, Groups B, C and D hazardous locations -
temperature rating T3. Installation must be in accordance with drawing 1100/898.
4. SWISS APPROVALS
The Eidgenossiches Starkstrominspektorat have recognised the certification to CENELEC
standards for the 1101 Control unit and 1132 and 1133 Transducer units.
Certificate No. 86, 1 14487, 03.
5. JAPANESE APPROVALS
The Ministry of Labour have approved the 1133 Transducer unit for Division 1 application.
Certificate No. 39568.
6. CANADIAN (CSA) APPROVALS
C.S.A have approved the 1100A (architecture codes 14 and 16) to the following standards:
C22.2 No 0-M
C22.2 No 0.4-M
C22.2 No 94
C22.2 No 142-M
C22.2 No 157-M
C22.2 No 213-M
Installation must be in accordance with drawing 01100/898 CSA.
To Next Page
Loading...
Need help?
General
