Manual – DFE32B Fieldbus Interface PROFINET IO
33
5
Project planning for the PROFINET IO controller
Project Planning with PROFINET
Node configura-
tion
When the individual slots are configured, the new node has to be configured with further
settings. Double-click the device symbol of the new node to open the following dialog.
• Enter the device name mentioned above in the "Device name" edit box [3] on the
"General" tab [1]. Note that the name is case-sensitive.
62336AEN
[1] "General" tab
[2] "IO cycle" tab
[3] "Device name" edit box
[4] [Ethernet] button
[1]
[3]
[2]
[4]
To Next Page
Loading...
