44
Operating Instructions – MOVIFIT® basic
6
Parameterization with LT-BG keypad
Startup
6.6.3 Reset parameters to default settings
To reset the parameters to their default value, proceed as follows:
1. Check the connection of the MOVIFIT
®
basic unit.
See chapter "Electrical Installation".
2. Connect the LT-BG operator terminal to the MOVIFIT
®
basic unit.
See chapter "LT-BG operator terminal connection".
3. Press the 3 keys , , and simultaneously for at least 2 s.
After 2 s, the display shows "P-def".
4. Press the key to confirm the factory settings.
To Next Page
Loading...
