Sharp MX-M260 Operation Manual

9
1
Chapter 1
BEFORE USING THE MACHINE
This chapter contains basic information that should be read before using the machine.
PART NAMES AND FUNCTIONS
Exterior
Reversing single pass feeder (RSPF) (optional)
Place the original(s) that you wish to scan face up
here. (p.24)
Document cover (optional)
Place an original on the document glass and close
the document cover before copying starts.
Document glass
Place an original that you wish to scan face down
here. (p.23)
Power switch
Press to turn the machine power on and off. (p.14)
Handles
Use to move the machine.
Operation panel
Contains operation keys and the touch panel.
(p.11)
Job separator tray (Upper tray) (optional)
Print jobs and received faxes are delivered to this
tray.
Centre tray
Finished copies are delivered to the centre tray.
Front cover
Open to remove paper misfeeds and perform
machine maintenance. (p.129)
Paper trays
Each tray holds 500 sheets of copy paper. (p.16)
Upper right side cover
Open to remove misfeeds when an optional job
separator tray kit or a optional finisher is installed.
(p.133)
Side cover
Open to remove misfeeds. (p.129)
Side cover handle
Pull to open the side cover. (p.129)
Bypass tray paper guides
Adjust to the width of the paper. (p.19)
1
16
15
14
13
12
11
4
3
5
8
7
6
10
2
9
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Downloaded From ManualsPrinter.com Manuals

Sharp MX-M260 Specifications

General

Print Technology	Laser
Print Speed	26 ppm
Max Print Resolution	600 x 600 dpi
Copy Speed	26 cpm
Max Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Warm-up Time	25 seconds
Fax Resolution	200 x 200 dpi
Paper Capacity	1, 100 sheets
Max Paper Size	A3
Duplex Printing	Yes
Functions	Print, Copy, Scan
Zoom Range	25% to 400%
Supported Paper Sizes	A4, A5, B5
Network Connectivity	Optional (Ethernet)
USB Connectivity	USB 2.0
Weight	28.5 kg