29
COPY FUNCTIONS
2
5
Make sure that a suitable paper size is
automatically selected, or select
another size using the [PAPER
SELECT] key.
6
Select the number of copies and any
other desired copy settings, and then
press the [START] key ( ).
The original for the front
side is scanned.
7
Remove the first original and then place
the original for the back side on the
document glass. Close the RSPF and
then press the [START] key ( ).
To cancel automatic
two-sided copying, press
the [CLEAR] key ( ).
USING THE RSPF
1
Place the original(s) in the document
feeder tray. (p.24)
2
Touch the [2-SIDED COPY] key.
3
Touch the desired copy mode.
4
Touch the [OK] key.
5
Make sure that a suitable paper size is
automatically selected, or select
another size using the [PAPER
SELECT] key.
6
Select the number of copies and any
other desired copy settings, and then
press the [START] key ( ).
EXPOSURE
AUTO A4
PAPER SELECT
100%
When making two-sided copies of an odd
number of originals, touch the [READ-END]
key after scanning the last original.
Note
Portrait-oriented original
(A3 or B4 (11" x 17" or 8-1/2" x 14") size)
Before [BINDING CHANGE] After [BINDING CHANGE]
Touch the
BINDIN
HAN
E
key when making the
tablet binding, or when making automatic two-sided copies
of a one-sided A3 or B4 (11" x 17" or 8-1/2" x 14") size
portrait original, touch the [BINDING CHANGE] key.
EXPOSURE
AUTO A4
PAPER SELECT
100%
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
Need help?
General
