50
CONVENIENT COPY FUNCTIONS
1
Touch the key and then touch the
[COVER] key in the special modes
menu screen.
The cover setting screen
will appear.
The cover icon ( , etc.)
will also appear in the
screen to indicate that
the function is turned on.
2
Select the cover(s) that you wish to
add.
To add only a front cover, touch the [FRONT] key. To
add only a back cover, touch the [BACK] key. To add
both a front and back cover, touch the
[FRONT+BACK] key.
3
Specify whether or not the front cover
is to be copied on.
Select [YES] or [NO] in
the touch panel. If
[YES] is selected, the
first page of the
document will be
copied onto the front
cover sheet.
4
Touch the [OK] key in the cover
setting screen.
Return to the special modes screen.
5
Touch the [OK] key in the special
modes screen.
You will return to the main screen of copy mode.
6
Load the cover paper to be used into
the bypass tray.
Load the same size of
paper as the paper to
be used for the copy
job.
COVER
SPECIAL MODES
FRONT
BACK FRONT+BACK
PRINT ON FRONT COVER?
YES
NO
OK
CANCEL
OK
CK
PRINT ON FRONT COVER?
YES
NO
OK
CANCEL
About the steps that follow
See page 24.
• It is not possible to copy on the inside of a
front cover, nor on either side of a back
cover.
• Be sure to place the originals in the RSPF.
The document glass cannot be used for this
function.
•
During cover copying, stream feeding mode
will not function even if enabled in the
administrator settings. (See "6. SYSTEM
SETTINGS (ADMINISTRATOR)".)
• To cancel the cover copy function, select
the cover copy function again and touch the
[CANCEL] key. (See the screen of step 2.)
Note
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
Need help?
General
