91
SYSTEM SETTINGS (GENERAL)
44445
GENERAL PROCEDURE FOR SYSTEM SETTINGS
1
Press the [SYSTEM SETTINGS] key.
2
Touch the key of the desired setting.
The setting screen will appear.
Each of the system settings is explained on the
following pages.
The [TRAY SETTINGS] key is selected in the
following example.
When the [TRAY SETTINGS] key is selected, the
following screen appears.
3
Touch the [OK] key in the setting
screen to close it.
4
When you are ready to exit the system
settings, touch the [EXIT] key.
• When a checkbox appears next to an item
in a screen, touch the checkbox ( ) to
select the item. A checkmark ( ) will
appear to indicate that the item is
selected.
In the above settings, tray 1 can be used
for printer, copy, and fax mode. Tray 2 and
tray 3 can only be used for copy mode.
• For a detailed explanation of the trays, see
"CHANGING A TRAY’S PAPER TYPE
AND PAPER SIZE SETTINGS" (p.20).
OB STATUS
DATA
LINE
DATA
SYSTEM SETTINGS
SYSTEM SETTINGS
TOTAL COUNT
TRAY SETTINGS
ADDRESS
CONTROL
KEYBOARD
SELECT
ADMINISTRATOR SETTINGS
CLOCK
DISPLAY
CONTRAST
LIST PRINT
FAX DATA
FORWARD
RECEIVE MODE
EXIT
SYSTEM
SETTINGS
TRAY SETTINGS
TRAY 1
TRAY 3
TRAY 2 PLAIN / B4
PLAIN / A3
TYPE / SIZE
PRINT FAX
OK
1/3
PLAIN / A4
COPY
Note
SYSTEM SETTINGS
TOTAL COUNT
TRAY SETTINGS
KEYBOARD
SELECT
ADMINISTRATOR SETTINGS
CLOCK
DISPLAY
CONTRAST
ADDRESS
CONTROL
LIST PRINT
FAX DATA
FORWARD
RECEIVE MODE
EXIT
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
Need help?
General
