109
SYSTEM SETTINGS (ADMINISTRATOR)
6
CHANGE ADMINISTRATOR
PASSWORD
This program is used to change the administrator
password that must be entered to configure the
administrator settings. When the machine is first used,
the administrator of the machine should change the
administrator password that was set at the factory to
the desired 5-digit code. (A number that has been
programmed as an account number cannot be used.)
Only one administrator password can be programmed.
See page 154 for default administrator password.
PRODUCT KEY
(When the PRINTER
EXPANSION KIT is installed)
Use these programs to enter the product keys for the
following options.
PS3 EXPANSION KIT
(When the PRINTER EXPANSION KIT is
installed)
This program is used to enter the product key that
enables the machine to be used as a PostScript
printer. Ask your dealer for the product key.
NETWORK SCANNER EXPANSION KIT
(When the
PRINTER EXPANSION KIT
and
EXPANSION MEMORY are installed)
This program is used to enter the product key for the
network scanner function. Ask your dealer for the
product key.
E-MAIL ALERT AND STATUS
(When the PRINTER EXPANSION KIT is
installed)
This program is used to enter the product key for
E-MAIL ALERT AND STATUS, which enables
customer product support via a network system. Ask
your dealer for the product key.
APPLICATION INTEGRATION MODULE
(When the
PRINTER EXPANSION KIT
and
EXPANSION MEMORY are installed)
This setting is used to enter the product key that allows
use of the metadata send function.
Ask your dealer for the product key.
SERIAL NUMBER
Use this program to display the serial number of the
machine. The serial number is required when
obtaining product keys for PS3 EXPANSION KIT,
NETWORK SCANNER EXPANSION KIT,
APPLICATION INTEGRATION MODULE and the
E-MAIL ALERT AND STATUS.
SYSTEM SETTINGS
PRODUCT KEY
PS3 EXPANSION KIT
E-MAIL ALERT AND STATUS APPLICATION INTEGRATION MODULE
NETWORK SCANNER EXPANSION KIT
SERIAL NUMBER
OK
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
Need help?
General
