Sharp MX-M260 Operation Manual

20
BEFORE USING THE MACHINE
CHANGING A TRAY’S PAPER TYPE AND PAPER SIZE
SETTINGS
When you change the paper in a tray, follow the steps below to change the tray’s paper type and paper size settings.
The settings cannot be changed when operation has stopped because the paper ran out or a misfeed occurred, or
when an interrupt copy job is being performed.
Even in copy mode, the settings cannot be changed while a print job or received fax is being printed.
1
Load paper in the tray as explained in
"Loading the paper in the paper tray"
(p.18).
2
Press the [SYSTEM SETTINGS] key.
The system settings
menu screen will appear.
3
Touch the [TRAY SETTINGS] key.
The tray settings screen
will appear.
4
Select the tray in which you loaded
paper.
For the tray numbers,
see "PAPER" (p.16).
If the desired tray does
not appear in the display,
use the key or key
to scroll until it appears.
5
Select the size and type of paper that
is loaded in the tray.
The currently selected paper type will be highlighted.
• To change the paper type selection, touch the
appropriate type key.
• To change the paper size selection, touch the
appropriate size key.
•
To change the displayed size selections to inch sizes,
touch [AB INCH].
6
Touch the [OK] key.
7
A message appears prompting you to
check the paper in the tray. Check the
paper and then touch the [OK] key.
You will return to the tray settings screen.
• A5 (5-1/2" x 8-1/2") size paper can only be set for tray 1.
• B5 size paper cannot be set for tray 2 (However, B5R size paper can be set.).
• Tray settings for trays other than the bypass tray can be prohibited in the administrator settings. (See "6.
SYSTEM SETTINGS (ADMINISTRATOR)".)
Note
JOB STATUS
CAN
FAX
DATA
LINE
DATA
SYSTEM SETTINGS
TOTAL COUNT
TRAY SETTINGS
ADDRES
CONTRO
KEYBOARD
SELECT
ADMI
CONTRA
TRAY 1
TRAY 2
TRAY 3
PLAIN / B5
PLAIN / A3
TYPE / SIZE
PLAIN / A4
CUSTOM SETTINGS
TRAY 1 TYPE/SIZE SETTING
TYPE
RECYCLED
PLAIN
COLOUR
LETTER HEAD A3 B4
B5
A4R
A5
B5R
A4
OK
SIZE AB INCH
Downloaded From ManualsPrinter.com Manuals

Sharp MX-M260 Specifications

General

Print Technology	Laser
Print Speed	26 ppm
Max Print Resolution	600 x 600 dpi
Copy Speed	26 cpm
Max Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Warm-up Time	25 seconds
Fax Resolution	200 x 200 dpi
Paper Capacity	1, 100 sheets
Max Paper Size	A3
Duplex Printing	Yes
Functions	Print, Copy, Scan
Zoom Range	25% to 400%
Supported Paper Sizes	A4, A5, B5
Network Connectivity	Optional (Ethernet)
USB Connectivity	USB 2.0
Weight	28.5 kg