Sharp MX-M260 Operation Manual

138
TROUBLESHOOTING AND MAINTENANCE
Cleaning the scanning glass for RSPF (only when an RSPF is installed)
If white or black lines appear in copies made with using the RSPF, use the provided
glass cleaner to clean the scanning glass for RSPF.
1
Open the RSPF and take out the glass
cleaner.
2
Clean the scanning glass with the
glass cleaner.
3
Return the glass cleaner to its original
position.
THE BYPASS TRAY PAPER FEED ROLLER
If misfeeds occur frequently when feeding envelopes or other thick paper from the bypass tray, wipe the paper feed
roller at the feed slot of the bypass tray with a soft, clean cloth moistened with alcohol or water.
Example of dirty print image
Black lines
White lines
Scanning glass for RSPF
Use a soft cloth to gently wipe off dirt from the area on the operation
panel with a mirror-like finish (shown at right). If you use a stiff cloth or
rub hard, the surface may be damaged.
Note
The area with a mirror-like finish is
the area that is .
Bypass tray paper feed roller
Downloaded From ManualsPrinter.com Manuals

Sharp MX-M260 Specifications

General

Print Technology	Laser
Print Speed	26 ppm
Max Print Resolution	600 x 600 dpi
Copy Speed	26 cpm
Max Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Warm-up Time	25 seconds
Fax Resolution	200 x 200 dpi
Paper Capacity	1, 100 sheets
Max Paper Size	A3
Duplex Printing	Yes
Functions	Print, Copy, Scan
Zoom Range	25% to 400%
Supported Paper Sizes	A4, A5, B5
Network Connectivity	Optional (Ethernet)
USB Connectivity	USB 2.0
Weight	28.5 kg