Sharp MX-M260 Operation Manual

130
TROUBLESHOOTING AND MAINTENANCE
4
Close the front cover and side cover.
Make sure that the
misfeed message is
cleared.
B: Misfeed in the fusing area
1
Open the bypass tray and the side
cover.
2
Press and pull it open gently on both
sides of the front cover.
3
Turn the roller rotating knob in the
direction of the arrow.
4
Lift the fusing unit release levers and
carefully remove the misfed paper.
5
If you were unable to remove the
misfeed in step 4, press down on the
fusing unit paper guide knob to open
the paper guide, and carefully remove
the misfed paper.
6
Close the fusing unit paper guide and
press down on the fusing unit release
levers.
7
Close the front cover and side cover.
Make sure that the
misfeed message is
cleared.
The fusing unit is hot. Do not touch
the fusing unit when removing
misfed paper. Doing so may cause a
burn or injury.
Roller rotating knob
Fusing unit release levers
Warning
• Do not touch the photoconductive drum
(green portion) when removing the misfed
paper. Doing so may damage the drum
and cause smudges on copies.
• Take care not to let unfixed toner on the
misfed paper soil your hands or clothes.
Caution
Downloaded From ManualsPrinter.com Manuals

Sharp MX-M260 Specifications

General

Print Technology	Laser
Print Speed	26 ppm
Max Print Resolution	600 x 600 dpi
Copy Speed	26 cpm
Max Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Warm-up Time	25 seconds
Fax Resolution	200 x 200 dpi
Paper Capacity	1, 100 sheets
Max Paper Size	A3
Duplex Printing	Yes
Functions	Print, Copy, Scan
Zoom Range	25% to 400%
Supported Paper Sizes	A4, A5, B5
Network Connectivity	Optional (Ethernet)
USB Connectivity	USB 2.0
Weight	28.5 kg