144
APPENDIX
*1 First copy time is measured with original on the document glass in full ready condition with fuser at operating temperature and
mirror motor at operating speed, actual time may vary based on environment conditions.
*2 The warm-up time may vary depending on the power-supply voltage, ambient temperature, and other operating conditions.
Dimensions (with RSPF)
623 mm (W) x 628 mm (D) x 788 mm (H)
(24-17/32" (W) x 24-23/32" (D) x 31-1/64" (H))
Operating conditions Temperature: 15°C to 30°C (59°F to 86°F), Humidity: 20% to 85%
Noise level
Sound Power Level L
wA(1B=10dB)
Copying: 6.56[B] (MX-M260)
Copying: 6.55[B] (MX-M310)
Standby: 3.1[B] (MX-M260, MX-M310)
Sound Pressure Level L
pA (bystander positions)
Copying: 50[dB(A)] (MX-M260)
Copying: 49[dB(A)] (MX-M310)
Standby: 16[dB(A)] (MX-M260, MX-M310)
Sound Pressure Level L
pA (operator position)
Copying: 50[dB(A)] (MX-M260)
Copying: 49[dB(A)] (MX-M310)
Standby: 17[dB(A)] (MX-M260)
Standby: 17[dB(A)] (MX-M310)
Noise emission measurement in accordance with ISO 7779.
Emission concentration
(measured according
to RAL-UZ122: Edition
Jun. 2006)
Ozone: 1.5 mg/h or less
Dust: 4.0 mg/h or less
Styrene: 1.0 mg/h or less
Benzene: 0.05mg/h or less
TVOC(Printing): 10mg/h or less
TVOC(Pre-Operating): 1mg /h or less
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification
changes for product improvement without prior notice. The performance specification figures indicated are
nominal values of production units. There may be some deviations from these values in individual units.
Note
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
Need help?
General
