Sharp MX-M266N - Page 119

MX-M316N SIMULATION 6 – 40
43-4
Purpose
Setting
Function (Purpose)
Used to set the fusing temperature 2 in
each mode.
Section
Operation/Procedure
1) Select an item to be set with the scroll key.
2) Enter the set value with 10-key.
3) Press [OK] key.
The set value in step 2) is saved.
Code descriptions
List of destination groups
Ite
m
Display Content
Setting
range
Default value
26cpm 31cpm 35cpm
Group A Group B Group A Group B Group A Group B
SW-
A
SW-
B
SW-
A
SW-
B
SW-
A
SW-
B
SW-
A
SW-
B
SW-
A
SW-
B
SW-
A
SW-
B
A HL_UM PLAIN
PAPER BW DUP
Black and white plain paper
duplex TH_UM set value
70 - 220
190 195 190 195 195 195
BHL_US PLAIN
PAPER BW DUP
Black and white plain paper
duplex TH_US set value
70 - 220
190 195 190 195 195 195
CPLAIN PAPER BW
DUP APP CNT
Black and white plain paper
duplex applying number of
sheets
0 - 255
0 0 0 0 0 0
DHL_UM HEAVY
PAPER BW DUP
Black and white heavy paper
duplex TH_UM set value
70 - 220
190 195 190 195 195 195
E HL_US HEAVY
PAPER BW DUP
Black and white heavy paper
duplex TH_US set value
70 - 220
190 195 190 195 195 195
F HEAVY PAPER BW
DUP APP CNT
Black and white heavy paper
duplex applying number of
sheets
0 - 255
0 0 0 0 0 0
TH_UM Fusing thermistor main (Front surface of paper) HL_UM Heater lamp main (Heat roller for front surface of paper)
TH_US Fusing thermistor sub (Front surface of paper) HL_US Heater lamp sub (Heat roller for front surface of paper)
Group Destination
Group A U. S. A CANADA INCH - -
Group B EUROPE U. K AUS. AB_A AB_B
1
: ‘15/Aug.
1
1