PRODUCT DESCRIPTION 3
8015078/145N/2019-05 -24 | SICK STEGMANN OPERATING INSTRUCTIONS | AFS60/AFM60 PROFINET
33
Subject to change without notice
Service log history information, relative
values
The values of the parameter can be
reset.
Operating time in seconds
Maximum speed in rpm since the
encoder has been in operation
Counter for forward rotation
Counter for reverse rotation
Counter for direction change
The counter increments if the encoder
changes direction of rotation.
Motion time in seconds (is incremented
in case of movement with at least
6 rpm)
Current acceleration in rpm/s
Maximum internal LED current for the
sensor in µA
Minimum internal LED current for the
sensor in µA
Maximum operating voltage in volts
Maximum operating temperature in °C
Minimum operating temperature in °C
(must be interpreted as INT-32)
Counter of the diagnostics history
Counts the errors and warnings that
have occurred in the individual bits of
the sensor status S_STAT_A (see
Table 44 on page 57)
To Next Page
Loading...
Need help?
General
