12 GMS800 · Operating Instructions · 8013025 V1.2 · © SICK MAIHAK GmbH
Important Information
Subject to change without notice
1.6 Additional documents
Additional instructions and information
These Operating Instructions include further documents specifying the technical properties
of the GMS800. You need the appropriate additional documents for each device
component of your GMS800.
The respective required documents are included in the scope of delivery.
Electronic Device Passport
Each GMS800 is delivered with an Electronic Device Passport documenting the individual
device configuration, factory settings and individual specifications.
Table 1 User documents for the GMS800 (overview)
Device component Title Document type
Complete device GMS800 series Operating Instructions
Control unit
Basic Control Unit (BCU)
Supplementary Operating
Instructions
Basic Control Unit (BCU) Technical Information
Enclosures GMS810 enclosure
Supplementary Operating
Instructions
GMS815P
[1]
enclosure
[1] Standard version and “vapor-proof” version for potentially explosive atmospheres
GMS815P
[2]
enclosure
[2] Versions with enclosure pressurization system for potentially explosive atmospheres
GMS820P
[3]
enclosure
[3] In preparation
GMS830/GMS831 enclosure
I/O module I/O module
Gas module Gas module
Analyzer module Analyzer module DEFOR
Analyzer module OXOR-E
Analyzer module OXOR-P
Analyzer module THERMOR
Analyzer module UNOR-MULTOR
NOTICE:
b
Pay primary attention to the individual information and specifications
delivered with the device.
If the GMS800 is delivered as part of a measuring system:
Refer to the separate documents delivered for further information.