FLOWSIC100 Operating Instructions
Gas Velocity Monitor
Product Description
32 © SICK MAIHAK GmbH · Germany · All rights reserved 8012513/03-2008
Options
Using the following options, the functionality of the MCU can be extended considerably:
1. Display module
Module to display measured values and status information of the connected sensors
using operating keys (capacitive sensors). The integration of this module into already
delivered control units can only be done by the supplier.
Displays
The measurement screen displays bar graphs of two selectable main measured values
of a connected sensor or of the MCU. Alternatively up to 8 individual measured values of
a sensor can be displayed (switching with key ‘‘Meas”).
Fig. 2.20: LCD in graphical display (left) and in text display (right)
If a threshold value is exceeded, the display alternates between the measured values
and an alarm message.
Type Display
LED Power (green) Power supply OK
Failure (red) Functional failure
Maint. reqest (yellow Maintenance required
LCD Graphical display
(main display)
Two of a variety of possible measured values:
• Volume flow at actual conditions (Q a.c.)
• Volume flow at standard conditions (Q s.c.)
• Velocity of Gas (VoG)
• Speed of Sound (SoS)
• Acoustic temperature (T ac)
• Transducer temperature A (T A)
• Transducer temperature B (T B)
• Signal to noise ratio A (SNR A)
• Signal to noise ratio B (SNR B)
• Mass flow
Text display 6 possible measured variables (see graphical display)
Status: Operation
Status
Menu
Meas
VoG
4.2 m/s
Q a.c.
120 m /h
3
0
0
40
120
Status: Operation
Status
Menu
Meas
Q a.c.
VoG
SoS
T ak
T A
T B
120.00
4.2
337.54
18.2
17. 6
18.0
m/h
m/s
3
m/s
C
C
C
To Next Page
Loading...
