FLOWSIC100 Operating Instructions
Gas Velocity Monitor
Commissioning and Configuration
116 © SICK MAIHAK GmbH · Germany · All rights reserved 8012513/03-2008
4.4 Operation / Configuration with Option LCD Display
4.4.1 General Usage
The display and operation interface of the LCD display containt the functional elements dis-
played in Fig. 4.35.
Fig. 4.35: Functional elements LCD display
Key functions
The key‘s function depends on the current selected menu. Only the function currently dis-
played over the key is available.
Key Function
Diag Display diagnostic information (warnings and errors at start from the main menu,
sensor information on start from the diagnostic menu; see Fig. 4.36)
Back Go one menu up
Arrow ⇑ Scroll up
Arrow ⇓ Scroll down
Enter Start an action that was chosen with the arrow keys (go to submenu, affirmation of
selected parameter at configuration)
Start Start an action
Save Save a changed parameter
Meas
• Select a measured value to be displayed
• Switching between text and graphic display
• Jumb back to main menu from submenus
• Display of the contrast settings (after 2.5 s)
Status line
Display field
Current key
functions
Operating key
Status-LED
Selected menu
To Next Page
Loading...
