SICK DUSTHUNTER T User Manual

④ Press Esc then return to Main Menu.
⑤ To make changed items valid, press Enter key. Or press Esc key to return to
before modification has been made.
4) Caution
*. Be sure to confirm that “ SPAN (FULL) RANGE” is not zero.
*. Be sure to check that “ Point No. (DO, AO Channel No.)” should not overlap.
(Specially avoid overlapping ‘ 0’ )
*. If time factor is ‘ 0’ , it is not applicable.
[Picture 26]

SICK DUSTHUNTER T Specifications

General

Brand	SICK
Model	DUSTHUNTER T
Category	Measuring Instruments
Language	English