102
8009441/YN36/V3-0/2015-08| SICKOPERATING INSTRUCTIONS|GM35
Subject to change without notice
MAINTENANCE
8.7.2 Carrying out measurement
▸ Open the SR-unit and swivel to the side.
▸ Attach the RMF filter box with the adapter plate to the SR-unit and secure using the
quick-release fasteners: Take care not to damage the humidity sensor of the SR-unit!
▸ Install the reflector and set the operating lever to “GM35”.
Fig. 73: Installing the filter box
Filter box plate
Opening for humidity
sensor
Filter box
GM35 SR-unit
To Next Page
Loading...
