SICK IDM 1 Series

Appendix 8
8028134/2023-03-06
© SICK AG · Germany · All rights reserved · Subject to change without notice
50
SPP Master Legacy Mode
SPP Slave Mode
SPP Master Simple Pairing
Mode
HID Mode with Passkey
HID Mode
Uninstall
HID Legacy Mode
8.2.2 Host Interfaces
Please note that these host interface command barcodes only work with the Smart Cradle.

A separate driver needs to be installed on your host device for USB Com Port Emulation, unless the host device
is running Windows 10. The driver can be downloaded from the product page:
The call is made via the SICK Product ID: pid.sick.com/{P/N}/{S/N}
{P/N} corresponds to the part number of the product, see type label.
{S/N} corresponds to the serial number of the product, see type label (if indicated).