SICK OLM100 User Manual

7.7.2 Jump addresses
A jump address consists of a source jump address and a destination jump address.
T
he destination jump address assumes the same value (High or Low) as the associated
source jump address without any delay time whatsoever – unless it is a loopback. Infor‐
mation on loopbacks can be found in the “Flexi Soft in the Flexi Soft Designer”
(8012998) operating instructions.
Jump addresses are an elegant option for implementing complex logic relationships.
Among other things, jump addresses are used to connect the various pages of logic
with each other.
7.7.2.1 Finding source and destination jump addresses that belong together
To find the corresponding destination jump address for a source jump address (or vice
v
ersa), proceed as follows:
1. Right-click on the source or destination jump address.
2. Click Used on page.
✓
A list of all pages containing elements of the jump address is displayed.
3. Click on the desired page.
✓
The desired page is displayed. All elements of the jump address are highlighted in
color.
7.7.2.2 Adding a new source jump address
1. Drag the A
dd source jump address symbol from the toolbar on the left of the logic cre‐
ation page into the working range.
2. Enter a unique name in the Create jump mark dialog box.
3. Click on OK.
7.7.2.3 Adding a new destination jump address
1. Drag the A
dd destination jump address symbol from the toolbar on the left of the logic
creation page into the working range.
2. Select the desired jump mark in the Select jump mark dialog box.
3. Click on OK.
7.7.3 Verification of the logic
After the required parameters have been configured, the logic has to be certified before
bein
g transferred to the safety controller.
The manufacturer of the machine is responsible for the output connections and for the
logic verification.
7.7.4 Transfer configuration
b
T
ransmit configuration to the Flexi Soft main module (see operating instructions
8012998).
7 C
ONFIGURATION
72
O P E R A T I N G I N S T R U C T I O N S | Safe Linear Positioning 8020941/12O9/2019-08-05 | SICK
Subject to change without notice

SICK OLM100 Specifications

General

Brand	SICK
Model	OLM100
Category	Security Sensors
Language	English