135 / 244
Siemens Standard application AHU CE1P3977en_02
Building Technologies Application Info 01.02.2010
10 Application Info
You can always read, i.e. password not required, the main information:
− Application manufacturer.
− Application name and version.
− Date.
Additional information can be edited at access level 4 and thus modified to the pre-
sent plant (e.g. installation location):
− Name.
− Street.
− City.
– Main Index > System overview > Application info
– Minimum access level 4:
Main Index > System overview > All system settings > Application info
Parameter Explanation, example
Application manufacturer e.g. Siemens.
Application name and version. e.g. STD_AHU_vX.XX.
Date Creation data for the application; can be changed by the application
manufacturer.
Street E.g. plant address.
City E.g. plant address.
Settings (Requires access level 4).
Go to diagnostics special settings page. You can change name,
street and city here. See Diagnostics.
Main information
Additional
information
Parameter
Basis Document Siemens Climatix Control System
BDCX.100820.01GB
Page 135
To Next Page
Loading...
