Siemens Climatix Series - Page 150

150 / 244
Siemens Standard application AHU CE1P3977en_02
Building Technologies SD card and modem 01.02.2010
Main Index > System overview > Communication > SMS
Parameter Range Function
Actual number 20. Disable
21. NO. 1
22. NO. 2
23. NO. 3
24. NO. 4
Disable SMS function
Send SMS to telephone numbers 1 -4.
Language 25. English
26. Swedish
27. German
28. Lang4
29. Lang5
Select SMS language. Languages 4 and 5 not
yet implemented.
Settings SMS Go to settings page to parameterize SMS.
Settings Modem Go to settings page to parameterize modem.
Main Index > System overview > Communication > SMS > Settings SMS
Parameter Range Function
Free SMS 1
SAPHIR free SMS….
Free flow text for SMS Text 1
Edit SMS text on the page Main Index > Sys-
tem overview > Communication > SMS > Set-
tings SMS > Settings.
Free SMS 2
SAPHIR free SMS….
Free flow text for SMS Text 2
Edit SMS text on the page Main Index > Sys-
tem overview > Communication > SMS > Set-
tings SMS > Settings.
Fix SMS 1…
Fix SMS 10
Settings Go to settings page to enter both free flow SMS
texts.
Main Index > System overview > Communication > SMS > Settings Modem
Main Index > System overview > Communication > Modem
Parameter Range Function
Connection type
0 No modem
1 GSM modem
2 Analog modem
Displays whether a modem is connected.
State 0…11 See List below
Signal streng
GSM
Signal strength of GSM modem
PIN Modem PIN number.
SMS PIN The controller can also receive SMS. Is only ed-
ited if you have a certain PIN that can be set
here.
This function currently not implemented!
Phone nbr 1 Enter telephone 1.
Phone nbr 2 Enter telephone 2.
Phone nbr 3 Enter telephone 3.
Phone nbr 4 Enter telephone 4.
SMS active nbr 0…4 Displays the number to which any potential SMS
is sent. 0 = SMS switched off.
Parameter
Parameterize SMS
Parameterize modem
Basis Document Siemens Climatix Control System
BDCX.100820.01GB
Page 150