Siemens FC361 Series - Page 54

Installation
Accessories
6
54 | 151
A6V10421795_en--_k
6.11.5.1 Event printer
The RS232 module connects one external printer Fujitsu DL3750+ to the panel.
Detailed information on the printer is available on the CD supplied with the printer.
Connection:
Precondition: RS232 module is installed. See chapter 'RS232/RS485 module
[➙ 52]'.
The picture below shows the connection between the printer and panel.
The connection cable is wired as per the following connection diagram.
● The connection cable has a maximum length of 15 meters.
● Use shielded cables.
FCA2001-A1
DB-25, male
A:
Screw connection on RS232 module (FCA2001-A1)
B:
25-pole connector (DB-25, male) for Fujitsu DL3750+ printer
Configuration:
No configuration is required.
FUJITSU DL3750+
FCA2001-A1
FC361-xx
X3
6
5
7
8
RTS
TXD
DTR
RXD
0 V
CTS
DSR
DCD
DTE-HOST
1
2
3
4
TXD
RXD
GND
B
A