9 Operation at Use of a PC
9.3 Configuration of the Device
248 SICAM Q100, 7KG95xx, Device Manual
E50417-H1040-C522-A6, Edition 06.2019
File download -> Open
Alternatively, you can view the information on the screen and print them if needed. Proceed as follows:
✧ In the File download dialog, click Open.
A text editor opens which contains the mapping information on the Modbus slave device (CLIENT
MAPPING INFORMATION (see following section)).
✧ On the menu bar of the text editor, click File -> Print....
✧ Select the desired printer in the Print dialog and click Print.
The list is printed on the connected printer.
✧ Close the text editor.
CLIENT MAPPING INFORMATION
The CLIENT MAPPING INFORMATION is created as a text file when the export function is triggered. The fol-
lowing example shows a configuration with 3 measured values and 3 indications.
Configuration of measured values:
Figure 9-74 Configuration of 3 Measured Values (example)
MAN_SICAM_Q100_US.book Page 248 Wednesday, June 5, 2019 9:31 AM
To Next Page
Loading...
