Commissioning and Diagnostics
6-16
Distributed I/O Device ET 200M
EWA-4NEB780600602-06
6.4 Structure of the Diagnosis
Introduction
The IM 153-x makes the standard slave diagnosis available to you. Note the
differences in the diagnostic frame depending on which version of IM 153-x and
which release you have.
Depending on the DP master and parameter assignment, the following can provide
an enhanced diagnosis:
IM 153-1 as of 153-1AA03, version 02, DDB version V1.18;
IM 153-1 as of 153-1AA83, version 01, DDB version V1.18;
IM 153-2 as of 153-2AA02, version > 06, DDB version V1.9;
IM 153-2 FO as of 153-2AB01, version > 05, DDB version V1.5.
IM 153-2 as of 153-2AA00, version > 01, DDB version V1.0;
IM 153-2 FO as of 153-2AB00, version > 01, DDB version V1.0
You can find detailed information in the diagnostic frame in the form of the module
status and channel-specific diagnoses (see Figure 6-5 on Page 6-18).
Section Subject Page
6.4.1 Structure of the Slave Diagnosis 6-17
6.4.2 Station Statuses 1 to 3 6-19
6.4.3 Master PROFIBUS Address 6-21
6.4.4 Manufacturer ID 6-21
6.4.5 Module Diagnosis 6-22
6.4.6 Module Status 6-23
6.4.7 Channel-Specific Diagnosis 6-24
6.4.8 H Status (with S7-400H and Standard Redundancy Only) 6-28
6.4.9 Interrupts 6-29
6.4.10 Evaluating Interrupts from the Device-Specific Diagnosis 6-38
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
