Siemens SIMATIC ET 200M

Commissioning and Diagnostics
6-37
Distributed I/O Device ET 200M
EWA-4NEB780600602-06
Process Interrupt of Analog Input Modules
Byte x+4
Upper limit violation on channel 0 of the module
0
Bytes x+6 and x+7:
17
Upper limit violation on channel 1 of the module
Byte x+5
Lower limit violation on channel 0 of the module
017
Lower limit violation on channel 1 of the module
Upper limit violation on channel 7 of the module
:
:
Lower limit violation on channel 7 of the module
:
:
34625
346251
Module-specific information;
see the description for each module
Figure 6-16 Structure as of byte x+4 for process interrupt (analog inputs)
Process Interrupt of Digital Input Modules
Byte x+4
0
Bytes x+6 and x+7:
17
Byte x+5
01
7
Edge change on channel 9 of the module
Edge change on channel 7 of the module
:
:
Edge change on channel 15 of the module
:
:
34625
346251
Edge change on channel 0 of the module
Edge change on channel 1 of the module
Edge change on channel 8 of the module
Module-specific information;
see the description for each module
Figure 6-17 Structure as of byte x+4 for process interrupt (analog inputs)
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com