Commissioning and Diagnostics
6-34
Distributed I/O Device ET 200M
EWA-4NEB780600602-06
Diagnostic Interrupt of Modules with Digital Outputs
Byte x+8
70
72
H
: Module with digital outputs
Byte x+9
7
Length of the channel-specific diagnosis
70
Number of channels per module
Byte x+10
0
Byte x+11
70
Diagnostic event on the channel/channel group 0 of the module
Byte x+12
7
Configuration/parameter assignment error
0
Diagnostic event on the channel/channel group 1 of the module
1
Short-circuit to M
3
Wire break
4
Byte x+19: Assignment for channel/channel group 7 as for byte x+12
Byte x+13: Assignment for channel/channel group 1 as for byte x+12
23
6
Temperature rise
Byte x+14: Assignment for channel/channel group 2 as for byte x+12
:
Short circuit to L+
2
4
56
:
:
51
0
Ground fault
External load voltage is missing
Diagnostic event on channel/channel group 7 of the module
Diagnostic events for channel/channel group 0
Byte x+4
:
Byte x+7
See Figure 6-11 on page 6-32
Figure 6-13 Structure as of byte x+8 for diagnostic interrupt (digital outputs)
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
