Siemens SIMATIC ET 200M

Product Overview
1-9
Distributed I/O Device ET 200M
EWA-4NEB780600602-06
Table 1-2 IM 153-x: features and variants
Functions/
Interface Module and Order Number 6ES7 ...
Features
153-1AA.. 153-2Ax.. 153-2Bx..
Module change during operation
2
Direct communication
(see Section 3.10)
Enhanced diagnostics
(see Section 6.4)
SYNC, FREEZE –
Forwarding
of parameterization data from PG/PC
(see Section 3.2)
–
Parameterizable FM in an
ET 200M (see Section 3.3)
–
Time synchronization on the PROFIBUS
bus system, time stamping of input
signals
(see Section 3.4)
–
Redundancy
1
(see Section 3.5)
–
Configuration modification in RUN
 In the redundant system
 In the non-redundant system
(See Section 3.6)
–
– –
Clock synchronism
1
(see Section 3.7)
– –
Identification data
(see Section 3.8)
– –
Update
(see Section 7.8.2)
– –
1 SYNC, FREEZE should not be used with these functions (see Section 3.5 and 3.7).
2 Not with IM 153-1AA8x
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com