Siemens SIMATIC ET 200M Manual

Contents
xiii
Distributed I/O Device ET 200M
EWA-4NEB780600602-06
6-9 Structure of the H status of the IM 153-2 (only for S7-400H) 6-28. . . . . . . . . . .
6-10 Structure of the interrupt status of the interrupt section 6-31. . . . . . . . . . . . . . .
6-11 Structure of bytes x+4 to x+7 for diagnostic interrupt (digital
and analog modules) 6-32. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6-12 Structure as of byte x+8 for diagnostic interrupt (digital inputs) 6-33. . . . . . . . .
6-13 Structure as of byte x+8 for diagnostic interrupt (digital outputs) 6-34. . . . . . .
6-14 Structure as of byte x+8 for diagnostic interrupt (analog inputs) 6-35. . . . . . . .
6-15 Structure as of byte x+8 for diagnostic interrupt (analog outputs) 6-36. . . . . . .
6-16 Structure as of byte x+4 for process interrupt (analog inputs) 6-37. . . . . . . . . .
6-17 Structure as of byte x+4 for process interrupt (analog inputs) 6-37. . . . . . . . . .
6-18 Structure as of byte x+4 for module removal/insertion interrupt 6-38. . . . . . . .
7-1 Removing the front connector coding key 7-9. . . . . . . . . . . . . . . . . . . . . . . . . . .
7-2 Location of the fuses on digital output modules 7-14. . . . . . . . . . . . . . . . . . . . . .
7-3 Update via PROFIBUS-DP (PG/PC directly connected to IM 153-2) 7-18. . . .
7-4 Update via PROFIBUS-DP (PG/PC connected to IM 153-2 via CPU) 7-18. . .
7-5 Update via MMC 7-19. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8-1 Dimensioned drawing of the IM 153-1 and IM 153-2 8-11. . . . . . . . . . . . . . . . . .
8-2 Basic circuit diagram of the IM 153-1 and IM 153-2 8-11. . . . . . . . . . . . . . . . . .
8-3 Basic circuit diagram of the IM 153-2 FO 8-11. . . . . . . . . . . . . . . . . . . . . . . . . . .
8-4 Response time of the ET 200M 8-12. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Tables
1-1 Components of an ET 200M 1-6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1-2 IM 153-x: features and variants 1-9. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-1 Structure of data record 248 for ET 200M 3-22. . . . . . . . . . . . . . . . . . . . . . . . . .
3-2 Structure of data records with identification data 3-23. . . . . . . . . . . . . . . . . . . .
3-3 Identification data 3-24. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-1 Fixing holes for rails 4-10. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-2 Module accessories 4-12. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-3 Installing the modules on the rail 4-13. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-4 Slot numbers for S7 modules 4-15. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5-1 DIN VDE specifications for configuring a PLC system 5-5. . . . . . . . . . . . . . . .
5-2 Wiring rules for the power supply and the IM 153-x 5-13. . . . . . . . . . . . . . . . . .
5-3 Wiring rules for module front connectors 5-14. . . . . . . . . . . . . . . . . . . . . . . . . . .
5-4 Wiring the front connector 5-19. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5-5 Preparing the signal module for operation 5-20. . . . . . . . . . . . . . . . . . . . . . . . . . .
5-6 Assignment of cable cross-sections and terminal elements 5-21. . . . . . . . . . . .
6-1 Software prerequisites for commissioning 6-2. . . . . . . . . . . . . . . . . . . . . . . . . .
6-2 Commissioning prerequisites for the DP slave 6-3. . . . . . . . . . . . . . . . . . . . . .
6-3 Procedure for commissioning the DP slave 6-3. . . . . . . . . . . . . . . . . . . . . . . . .
6-4 Comparison between DPV1 and DPV0 slave 6-8. . . . . . . . . . . . . . . . . . . . . . . .
6-5 Status and error LEDs on the IM 153-1 6-10. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6-6 Status and error messages of the IM 153-2 6-11. . . . . . . . . . . . . . . . . . . . . . . . .
6-7 Displaying the diagnosis using STEP STEP 7 and STEP 5 6-13. . . . . . . . . . .
6-8 Structure of station status 1 (Byte 0) 6-19. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6-9 Structure of station status 2 (Byte 1) 6-20. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6-10 Structure of station status 3 (Byte 2) 6-20. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6-11 Structure of the manufacturer ID (Bytes 4, 5) 6-21. . . . . . . . . . . . . . . . . . . . . . . .
6-12 Channel-specific error messages to PROFIBUS standard 6-26. . . . . . . . . . . .
6-13 Channel-specific error messages – manufacturer-specific 6-27. . . . . . . . . . . . .
7-1 Removing modules without ”module change during operation” 7-8. . . . . . . .
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Siemens SIMATIC ET 200M Specifications

General

Brand	Siemens
Model	SIMATIC ET 200M
Category	I/O Systems
Language	English