iii
Distributed I/O Device ET 200M
EWA-4NEB780600602-06
Preface
Purpose of the Manual
The information in this manual enables you to operate an IM 153 slave interface
with the modules of the S7-300 range in the ET 200 distributed I/O device as a DP
slave.
Required Basic Knowledge
You will need general knowledge of automation technology to understand the
content of this manual.
Furthermore, you also need to know how to use computers or similar PC tools
(e.g. programming devices) under the operating system Windows 95/98/2000 and
NT. You should also be familiar with the basic software STEP 7. The required
information and basic knowledge can be found in the manual ”Programming with
STEP 7 V5.1”.
Scope of Validity of the Manual
Module Order Number As of Version
IM 153-1 6ES7 153-1AA03-0XB0 02
6ES7 153-1AA83-0XB0 01
IM 153-2 6ES7 153-2AA02-0XB0 07
6ES7 153-2BA00-0XB0 01
IM 153-2 FO 6ES7 153-2AB01-0XB0 06
6ES7 153-2BB00-0XB0 01
Convention: The designation IM 153-x is used in this manual, except when a
description refers specifically to a special version of the IM 153-x.
One version of the IM 153-1 can also be used as a module in the extended range
of environmental conditions (outdoors) (see Section 1.3). You can find out the
climatic and mechanical environmental conditions in which you can use this
IM 153-1 in the Reference Manual Module Specifications.
We reserve the right in the case of the new releases of IM 153-x modules to
include a product information document containing current information with the
IM 153-x slave interface or the manual.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
