Siemens SIMATIC IPC547D - Page 100

Technical specifications
8.4 Technical specifications
SIMATIC IPC547D
100 Operating Instructions, 06/2011, A5E03473780-01
Interfaces
COM 1 Serial interface 1 (V.24), 9-pin D-sub plug
COM 2 (optional) Serial interface 2 (V.24), 9-pin D-sub plug
LPT (optional) Parallel interface (Standard, EPP and ECP mode)
Connection for printer with parallel port
VGA Connection of an analog monitor (via adapter)
DisplayPort For connecting a digital monitor
DVI-I For connecting a digital monitor
2x DVI-D/VGA with Dual-Head
graphics controller (optional)
For connecting two digital or analog monitors
Keyboard PS/2 keyboard connection
Mouse PS/2 mouse connection
USB High speed USB 2.0
 USB (on rear panel): 8 x (500 mA high current)
 USB (on front panel): 2 x (500 mA high current)
 USB (internal): 2 x (500 mA high current) with mech. lock
Ethernet 2 x Ethernet interface (RJ45)
Wake on LAN, remote boot and teaming supported.
10/100/1000 Mbps
 Ethernet 1: 82579LM, AMT-capable.
1
 Ethernet 2: 82574 L
Audio
 Micro
 Line In
 Line Out
Conexant CX20642, 5.1 channels, high definition audio codec
2 X 0.5 W/8 Ω
1
AMT and teaming cannot be used simultaneously on the Ethernet interface.
Approvals
CE residential area (emission)
CE industrial area (immunity)
cUlus
EN61000-6-3:2007
EN61000-6-2:2005
60950-1