Commissioning the device
4.3 Information on optional features
SIMATIC IPC547D
Operating Instructions, 06/2011, A5E03473780-01
39
4.3 Information on optional features
4.3.1 DVD burner
The DVD burner drive is an optional feature for the device.
The DVD burner drive is an optional feature. Recording methods supported by the disk drive:
Disc at once, Track at once, Session at once, Packet writing. You can write to CD-R, CD-
RW, DVD+R, DVD-R, DVD-RW, DVD+RW, DVD-RAM and dual-layer media.
Burner software
Depending on the operating system, you need to install additional software (burner software)
to use the full functionality of the DVD burner. This software is included on the CD supplied
with the device. Insert the CD in the drive, run setup and follow the instructions on the
screen.
NOTICE
When first starting the burner software, no disks should be inserted in the drive. This is
because disks with errors can interrupt the automatic hard drive recognition. This makes it
impossible to correctly display the possible burner functions.
Notes on burning optical disks
Burner operation is only permitted in an environment free of shock and vibration.
NOTICE
Danger of data errors when burning disks
It cannot be ruled out that the smallest vibrations in the environment and varying quality of
raw discs could result in data errors when burning data media, even when no error
message occurs.
Data comparison is the only guarantee that data has been written correctly.
Perform data comparison each time you burn a disc.
To Next Page
Loading...
