Siemens SIMATIC IPC547D User Manual

Device maintenance and repair
7.1 Removing and installing hardware components
SIMATIC IPC547D
Operating Instructions, 06/2011, A5E03473780-01
73
Procedure


1. Remove the modules of the
redundant power supply.
2. Remove the power supply cables fo
r
the drives and the motherboard from
the housing of the redundant power
supply.
3. Remove the cable ties securing the
power cables in the housing.
4. Remove the screws
①.
5. Remove the highlighted screws
②.
6. Remove the housing of the
redundant power supply from the
device.
7.1.9 Removing the motherboard
Requirement
● The device is disconnected from the power network.
● The device is opened.
● A motherboard
The motherboard as spare part is supplied without processor and memory modules.
Procedure
1. Remove the modules from the slots.
2. Note the assignment of all cables to the motherboard.

Siemens SIMATIC IPC547D Specifications

General

Brand	Siemens
Model	SIMATIC IPC547D
Category	Industrial PC
Language	English