Commissioning the device
4.3 Information on optional features
SIMATIC IPC547D
48 Operating Instructions, 06/2011, A5E03473780-01
Functions for managing the RAID system
The pre-installed RAID system software offers enhanced functionality for RAID system
operation and management. You start it with "Start > Programs > Intel Matrix Storage
Manager".
The "View -> Advanced Mode" command returns details of the RAID system.
The "View -> System Report" command can be used to create a report with details of the
RAID system.
NOTICE
By default, the entries of the RAID status take place in the Windows Event Viewer and in a
log file of the program.
If an error occurs, a hard disk drive can be synchronized at the operating system level. If
the new hard disk is synchronized in the background, this may take several hours,
depending on the size of the disk and the system load.
The redundant system state RAID Level 5 is only recovered if synchronization has been
successfully completed.
To Next Page
Loading...
Need help?
General
