Device maintenance and repair
7.5 Installing the software
SIMATIC IPC647D
114 Operating Instructions, 01/2014, A5E32996306-AA
Partitions in delivery state for Windows 7 and Windows Server 2008 R2
Automatically set up by installation program
Information for systems with RAID or AHCI controller
Data carrier controllers unknown to the operating system must be made known to the
operating system prior to installation in the "Install Windows" installation program.
You have copied the relevant controller driver to a USB stick.
1. Connect the USB stick with the controller driver to the device.
2. Start the "Install Windows" installation program as described above.
3. Select "Load Drivers" in the Windows installation window.
4. Select the respective driver on the USB stick.
Setting up the language selection using the Multilanguage User Interface (MUI)
You can set the display of menus, dialogs or other information, such as date and time, to a
different language. For this purpose, you can either select one of the preinstalled languages
or install a new language package.
The following command sequences are described in English. Depending on the default
setting, they can be displayed in another language.
Note
Specific information for setting up the language selection for Windows
operating systems is
available in the following manuals (not included in the product package):
Windows 7,Technical Reference (MS Press No. 5913)
Windows Server 2008, Technical Reference (MS Press No. 5919)
Changing the settings for language, region and formats of a registered user account
1. Choose:
"Start > Control Panel > Clock, Language, and Region > Regional and Language
Options"
2. You can make the desired changes in the "Formats" and "Location und Keyboards and
Languages" tabs.
To Next Page
Loading...
