Siemens SIMATIC IPC827D - AC Voltage Supply

Technical specifications
8.4 Technical specifications
SIMATIC IPC627D/827D
Operating Instructions, 09/2014, A5E32990859-AB
119
Typical power values
IPC627D
Component
Current consumption
230 V AC
Current consumption
24V DC
Power consumption
efficiency 0.85
Base device
0.3 A
3.0 A
70 W
Hard disk drive 1 × 3.5"
0.04 A
0.38 A
9 W
Hard disk drives 2 × 2.5"
0.03 A
0.25 A
6 W
DVD burner drive 0.02 A 0.17 A 4 W
USB ports
Max. 0.06 A
Max. 0.54 A
Max. 13 W
PCI/PCIe slots
0.16 A max.
1.54 A max.
Max. 37 W
IPC827D
Component
Current consumption
230 V AC
Current consumption
24V DC
Power consumption
efficiency 0.85
Base device
0.3 A
3.0 A
70 W
Hard disk drive 1 × 3.5"
0.04 A
0.38 A
9 W
Hard disk drives 2 × 2.5"
0.03 A
0.25 A
6 W
DVD burner drive
0.02 A
0.17 A
4 W
USB ports
Max. 0.06 A
Max. 0.54 A
Max. 13 W
PCI/PCIe slots
Max. 0.26 A
Max. 2.54 A
Max. 59 W
8.4.4
AC voltage supply
Technical data
Degree of protection
IP20 (in installed state)
Protection class
VDE 0106
Note
The power supply contains an active PFC (Power Factor Correction) circuit to conform to the
EMC guidelines.
Uninterruptible AC power systems (UPS) must supply a sinusoidal output voltage in the
normal and buffered mode when u
sed with SIMATIC PCs with an active PFC.
UPS characteristics are described and classified in the standards EN 50091
-3 and IEC
62040
-3. Devices with sinusoidal output voltage in the normal and buffered mode are
identified with the classification "VFI
-SS-...." or "VI-SS-....".