Siemens SIMATIC IPC827D - Exit Menu

Technical specifications
8.6 BIOS description
SIMATIC IPC627D/827D
Operating Instructions, 09/2014, A5E32990859-AB
151
The following table shows the standard menus. Not all menus are included in each supplied
device configuration.
Menu
Meaning
Main
Display system information, for example, BIOS version, processor and memory
Advanced
Configure hardware using different submenus
Security
Security functions, e.g., setting a password
Power Specify CPU settings and switch-on functions.
Boot
Determine boot options, e.g., boot order
Exit
Save and exit (see Exit menu)
8.6.4
Exit menu
You always exit BIOS Setup in this menu.
Exit Saving Changes All changes are saved and the system is restarted with the new Setup
parameters.
Save Change Without
Exit
All changes are saved
Exit Discarding Changes All changes are discarded and the system is restarted with the old Setup
parameters.
Load Optimal Defaults All setup parameters are reset to the safe default values.
Notice: The existing Setup parameters are overwritten by this.
Load Custom Defaults The profile must be loaded with the custom Setup parameters.
Requirement: The parameters are saved prior to this with "Save Custom
Defaults".
Save Custom Defaults The currently configured Setup parameters are saved as a custom profile
(see also "Load Custom Defaults").
Discard Changes
All changes are discarded.