Siemens SIMATIC IPC827D - Active Management Technology (AMT); Introduction

Technical specifications
8.7 Active Management Technology (AMT)
SIMATIC IPC627D/827D
158 Operating Instructions, 09/2014, A5E32990859-AB
On-screen error messages
On-screen error message
Meaning / tip
Operating system not found Possible causes:
• No operating system installed
• Incorrect active boot partition
• Wrong boot drive settings in SETUP
Keyboard controller error Controller error.
Contact your technical support team.
SMART failure detected on HDD Hard disk reports pending failure through
S.M.A.R.T.
CMOS battery failed
CMOS battery is not connected.
CMOS battery weak
CMOS battery is weak
Real-time clock has lost power
The CMOS clock was operated without battery or
with a battery that was too weak, during battery
change, for example. Check the CMOS clock.
Keyboard error
No keyboard inserted.
PLD configuration failed Programming of the PLC on the motherboard
has failed.
8.7
Active Management Technology (AMT)
8.7.1
Introduction
Intel® Active Management Technology (Intel® AMT) is an Intel technology for the remote
maintenance of SIMATIC Industrial PCs (IPCs) with AMT technology using a management
PC. It is not necessary to install an operating system on the SIMATIC IPC with Intel® AM.
Intel® AMT provides numerous functions, e.g.:
●
Keyboard Video Mouse (KVM) Redirection
KVM connections are always possible using the KVM server that is integrated in the
firmware. KVM enables access to IPCs with a corrupted or no operating system as the
KVM server is integrated in the AMT hardware. KVM enables you to reboot a remote
computer and make changes to its BIOS settings.
●
Remote power management
SIMATIC IPC with Intel ® AMT can be switched on and off or restarted using another PC.