Siemens SIMATIC IPC827D - Installing or Updating Application Programs and Drivers; CP 1616 Onboard; Backing up Data; Creating an Image

Device maintenance and repair
7.6 Recycling and disposal
SIMATIC IPC627D/827D
Operating Instructions, 09/2014, A5E32990859-AB
99
7.5.8.2
Installing or updating application programs and drivers
You need a corresponding internal or external drive for installation of software under
Windows operating systems from CD or DVD.
For information about installation of SIMATIC software packages, refer to the corresponding
manufacturer documentation.
For updates of third-party drivers and application programs, contact the respective
manufacturer.
7.5.8.3
CP 1616 onboard
NDIS device driver
Read the information in the Installation_CP16xx.pdf document and on the supplied
"Documentation and Drivers" CD/DVD.
PROFINET IO
Read the information in the "Integration" section listing the SIMATIC devices and SIMATIC
NET documentation.
7.5.9
Backing up data
7.5.9.1
Creating an image
Data backup with Windows Embedded Standard 7 and Windows 7
We recommend that you use the
SIMATIC IPC Image & Partition Creator
software tool for
data backups in Windows Embedded Standard 7 and Windows 7. This tool provides
convenient and efficient functions for backing up and restoring the full content of memory
cards, hard disks and individual partitions (images).
SIMATIC IPC Image & Partition Creator
supports the burning of DVD media only. You can
order the tool using the Siemens online ordering system
(http://www.siemens.com/automation/mall). For more information about SIMATIC IPC Image
& Partition Creator, refer to its product documentation.
7.6
Recycling and disposal
The devices described in these operating instructions can be recycled thanks to their low
level of pollutants. Contact a certified disposal service company for environmentally sound
recycling and disposal of your old devices.