Siemens SIMATIC IPC827D - Page 149

Technical specifications
8.6 BIOS description
SIMATIC IPC627D/827D
Operating Instructions, 09/2014, A5E32990859-AB
149
The following keys are available in the BIOS selection menu:
Buttons
Function
Continue
Exit selection menu, continue start sequence
Boot Manager Specify the boot media from which to boot:
• Hard disk drive
• CD-ROM drive
• USB drive
Device Management
Start device manager for UEFI boot media
Boot From File Boot Maintenance Manager:
• Boot Options: Set boot order
• Driver Options: Configure drivers
• Console Options: Configure connected input device
• Boot from File: Start from an ".EFI" file
• Reset System: Restore factory settings
Secure Boot Option
1
Configuration settings to start the device in Secure Boot mode. The only
software modules loaded are those that are known to be safe for the
BIOS or the operating system.
SCU
Start BIOS Setup via Setup Configuration Utility
BIOS Update
Update BIOS from USB memory stick
MEBx Start Intel Management Engine BIOS Extension from Active
Management Technology Support (AMT)
1
Available as of Windows 8 or later