Siemens SIMATIC IPC827D - Page 153

Technical specifications
8.6 BIOS description
SIMATIC IPC627D/827D
Operating Instructions, 09/2014, A5E32990859-AB
153
Advanced > SATA Configuration
System parameters
Default settings
Local settings
SATA Controller
Enabled
HDC Configure As
AHCI
Advanced > Fan Control Configuration
System parameters
Default settings
Local settings
Fan Control Mode
Standard
Advanced > Video Configuration
System parameters
Default settings
Local settings
Primary Display Auto
IGD - Aperture Size
128 MB
IGD - DVMT Size
MAX
IGD boot type
VBIOS default
IGD boot type 2
Disabled
PEG0 - Gen X
Auto
PEG1 - Gen X
Auto
PEG2 - Gen X
Auto
Advanced > USB Configuration
System parameters
Default settings
Local settings
USB Precondition
Enabled
XHCI
Auto
Per-Port Control
Disabled
The following parameters are only visible if "Per-Port Control" is enabled (Enabled).
USB Port 0 (X61)
Enabled
USB Port 1 (X60)
Enabled
USB Port 2 (USB3 P2, internal)
Enabled
USB Port 3 (USB3 P3, front)
Enabled
USB Port 4 (X63)
Enabled
USB Port 5 (X62)
Enabled
USB Port 6 (USB2 P6, front)
1
Enabled
USB Port 6 (USB2 P6, touch)
2
Enabled
USB Port 8 (USB2 P8, internal)
Enabled
USB Port 9 (USB2 P9, internal) Enabled
USB Port 10 (USB2 P10, internal)
1
Enabled
USB Port 11 (USB2 P11, internal)
1
Enabled
1
Only with rack devices
2
Only with box devices