Device maintenance and repair
7.5 Installing the software
SIMATIC IPC847D
Operating Instructions, 01/2014, A5E32997454-AA
107
Installing drivers and software
Requirement
For multilingual Windows operating systems:
The default language for menus and dialogs is set to "English (U.S.)" in the regional settings.
Procedure
Installing drivers
1. If your device has no DVD drive, connect an external USB DVD drive to a USB port.
2. Insert the supplied "Documentation and Drivers" DVD.
3. Start the "Start" program.
4. Select "Drivers" from the index.
5. Select the device and operating system.
6. Select the required driver.
7. Open the folder with the driver data by clicking on the link next to "Driverpath".
8. Start the setup program in this folder.
Note
The driver for the chipset has to be installed before all other drivers with a new installation
of Windows Server 2008 R2 or Windows
7. Then you can install the drivers for all other
● You can find information about installing SIMATIC software packages in the
corresponding documentation.
● You can obtain information about driver updates and installing application programs from
the respective manufacturers.
To Next Page
Loading...
