Siemens SIMATIC IPC847D - 1.3 Accessories

Overview
1.3 Accessories
SIMATIC IPC847D
Operating Instructions, 01/2014, A5E32997454-AA
25
1.3
Accessories
Accessories are available for your device. These are not included in the product package.
Information on available accessories is listed in the table below and on the Internet at the
following addresses:
● IPC expansion components (
http://www.automation.siemens.com/mcms/pc-based-
automation/en/industrial-pc/expansion_components_accessories)
● Industry Mall (http://mall.automation.siemens.com)
Name
Description
IPC647D
IPC847D
Order number and figure
Retainer for
locking the
internal USB
interface
The retainer is a mechanical safety device for
the internal USB interface. It optimizes the
protection of an internal USB memory stick
against loads caused by vibration and shock
during transportation or operation.
This increases the reliability and operational
safety of the device.
x x 6ES7648-1AA00-0XK0
Tower Kit
(not available in
all countries)
You can use the Tower Kit to convert the
device into an industrial Tower PC. This step
expands the operating range beyond the
control cabinet.
Components of the Tower Kit:
• Cover
①
• Base
②
• Accessories: Screws and rubber feet
- x 6ES7648-1AA00-0XD0