Siemens SIMATIC IPC847D - 8.6.2 Starting BIOS Setup

Technical specifications
8.6 BIOS description
SIMATIC IPC847D
174 Operating Instructions, 01/2014, A5E32997454-AA
8.6.2
Starting BIOS Setup
Procedure
1. Reset the device (warm or cold restart).
Depending on the device version, the default settings can differ from the figures shown.
The following message appears briefly on the display at the end of the self-test:
Press ESC for boot options
2. Press <ESC> to open the BIOS selection menu:
The following buttons are available in the BIOS selection menu:
Buttons
Function
Continue
Exit selection menu, continue start sequence
Boot Manager
Select boot drive
Device Management
Start Device Manager
Boot From File
Start from an ".EFI" file
Secure Boot Option
1
Configuration setting to start the device in Secure Boot mode. In Secure
Boot mode, only those software modules are loaded that are known to
be safe by BIOS or the operating system.
SCU
Start BIOS Setup using the Setup Configuration Utility
BIOS update
Update BIOS from USB memory stick
MEBx
Start Intel Management Engine BIOS Extension
1
Available as of Windows 8 or later