Siemens SIMATIC IPC847D User Manual

Technical specifications
8.6 BIOS description
SIMATIC IPC847D
Operating Instructions, 01/2014, A5E32997454-AA
179
Advanced > SATA Configuration
System parameters
Default settings
Local settings
SATA Controller
Enabled
HDC Configure As
AHCI
Advanced > Fan Control Configuration
System parameters
Default settings
Local settings
Fan Control Mode
Enhanced
"Memory Power and Thermal
Throttling" submenu: Advanced
Temperature
Advanced > Video Configuration
System parameters
Default settings
Local settings
Primary Display
Auto
IGD - Aperture Size
128 MB
IGD - DVMT Size
MAX
IGD boot type
VBIOS default
PEG0 - Gen X
Auto
PEG1 - Gen X
Auto
PEG2 - Gen X
Auto
Advanced > USB Configuration
System parameters
Default settings
Local settings
USB Precondition
Enabled
XHCI
Auto
Per-Port Control
Disabled
The following parameters are only visible if "Per-Port Control" is enabled (Enabled).
USB Port 0 (X61)
Enabled
USB Port 1 (X60) Enabled
USB Port 2 (USB3 P2, internal)
Enabled
USB Port 3 (USB3 P3, front)
Enabled
USB Port 4 (X63)
Enabled
USB Port 5 (X62)
Enabled
USB Port 6 (USB2 P6 front
)
Enabled
USB Port 8 (USB2 P8, internal)
Enabled
USB Port 9 (USB2 P9, internal)
Enabled
USB Port 10 (USB2 P10, internal)
Enabled
USB Port 11 (USB2 P11, internal)
Enabled

Siemens SIMATIC IPC847D Specifications

General

Brand	Siemens
Model	SIMATIC IPC847D
Category	Industrial PC
Language	English