Siemens SIMATIC S7-300 Module data Hardware And Installation Manual

Preface
S7-300 Programmable Controller Hardware and Installation
1-2 A5E00105492-01
Documentation required
This manual is part of the S7-300 documentation package.
Reference manual “CPU Data”
Examples
“CPU Data CPU 312 IFM to 318-2 DP”
“CPU Data CPU 312 C to 314C-2 PtP/DP”
“Technological Functions” Manual
Maual
Description of the individual technological functions:
- positioning
- counting
- point-to-point-link
- control
The CD contains examples on the technological
functions.
Installation manual
Manual
Configuration, installation, wiring, networking and
commissioning description of the S7-300
Operation, functions and technical specifications of the
CPU
Reference manua “module data”
Manual
Function description and technical specifications for the
signal modules , power supply modules and the
interface modules
Operating list
“CPU 312 IFM, 314 IFM, 313, 315,
315-2 DP, 316-2 DP, 318-2 DP”
“CPUs 312 C bis 314C-2 PtP/DP”
List of stored intructions of the CPUs and their
execution times.
List of executable blocks (OBs/SFCs/SFBs) and their
.execution times
Getting Started
Using concrete examples, Getting Starteds take you
through the individual steps of commissioning up to a
functioning application.
You are reading this manual
“CPU 31xC: positioning with analog output”
“CPU 31xC: positioning with digital outputs”
“CPU 31xC: count”
“CPU 31xC: point-to-point-link”
“CPU 31xC: control”
“CPU 31xC”
“S7 300”
In addition to this package, you require the following manuals:

Siemens SIMATIC S7-300 Module data Specifications

General

Series	S7-300
Manufacturer	Siemens
Protection Class	IP20
System	SIMATIC S7-300
Digital Inputs	Varies by module
Digital Outputs	Varies by module
Analog Inputs	Varies by module
Analog Outputs	Varies by module
Central Processing Unit	Varies by CPU model
Supply Voltage	24V DC or 120/230V AC
CPU Type	Varies (e.g., CPU 312, CPU 315, etc.)
Memory	Varies by CPU model
Communication Interfaces	MPI, PROFIBUS
Programming Languages	LAD, FBD, STL, SCL, GRAPH
Operating Temperature	0°C to 60°C
Storage Temperature	-40°C to 70°C
Relative Humidity	10% to 95% (non-condensing)