Siemens SIMATIC S7-300 Module data Hardware And Installation Manual

Quick Guide
S7-300 Programmable Controller Hardware and Installation
A5E00105492-01
2-3
Table 2-7 CPU performance
Information on ... is available in ...
Which is the most adequate memory setup for my
application?
Reference manual CPU Data
How do I install and remove Micro Memory Cards? Chapter Commissioning; Removing/Installing Micro
Memory Cards, in the Installation Manual
Which CPU meets my requirements on
performance ?
Instruction List; Reference Manual CPU Data
How long are CPU response and processing
times?
Reference manual CPU Data
Which technological functions are implemented? Manual Technological functions
How can I use these functions? Manual Technological functions
Table 2-8 Communications
Information on ... is available in ...
Which principles do I have to take into account? Manual Communication with SIMATIC
Which options and resources does the CPU offer? Reference manual CPU Data
How do I optimize communication with the help of
communication processors (CPs)?
the respective device Manual
Which communication network is most suitable for
my application?
Chapter Configuring; Configuring subnets, in the
Installation Manual
Manual Communication with SIMATIC
How do I network the specific modules? Chapter Configuring and wiring, in the Installation
Manual
Table 2-9 Software
Information on ... is available in ...
Which software do I require for my S7-300 system? Chapter Technical data; Reference Manual CPU
data
Table 2-10 Supplementary features
Information on ... is available in ...
How do I implement operator control and
monitoring?
(Human Machine Interface)
for text displays: the respective device manual
for operator panels: the respective device manual
for WinCC: the respective device manual
How can I integrate process control modules? for PCS 7: the respective device manual
What are the options of redundant and fail-safe
systems?
Manual S7-400H - Redundant systems; Manual
Fail-safe systems
Cross-reference
Please note that you can also download respective current manuals from our public
Internet URL. Details are found in the Preface.

Siemens SIMATIC S7-300 Module data Specifications

General

Series	S7-300
Manufacturer	Siemens
Protection Class	IP20
System	SIMATIC S7-300
Digital Inputs	Varies by module
Digital Outputs	Varies by module
Analog Inputs	Varies by module
Analog Outputs	Varies by module
Central Processing Unit	Varies by CPU model
Supply Voltage	24V DC or 120/230V AC
CPU Type	Varies (e.g., CPU 312, CPU 315, etc.)
Memory	Varies by CPU model
Communication Interfaces	MPI, PROFIBUS
Programming Languages	LAD, FBD, STL, SCL, GRAPH
Operating Temperature	0°C to 60°C
Storage Temperature	-40°C to 70°C
Relative Humidity	10% to 95% (non-condensing)